您好,欢迎访问巨正东科技官方网站!

焊锡机_自动焊锡机_全自动焊锡机品牌领导者【首选巨正东焊锡机厂家】

致力于工业自动焊锡机器人的研发与生产

不仅仅是产品销售,更是技术服务

全国服务热线:

联系我们
自动焊锡机咨询
深圳市巨正东科技有限公司

公司电话:0755-8322-7111

服务电话:13823729649

企业邮箱:zh@juzhengdong.com

地址:深圳市宝安区沙井镇万丰98工业城19栋3楼

当前位置:首页 » 新闻资讯 » 行业动态 » USB自动焊锡机

USB自动焊锡机

文章出处:自动焊锡机_全自动焊锡机品牌领导者【首选巨正东焊锡机厂家】人气:-发表时间:2018-07-07 00:00:00【
摘要 : USB自动焊锡机,它节省了企业的人工成本,同时也保证了焊线成品的质量。

  自动焊锡机是电子企业生产中常见的一种设备之一,对于生产数据线的企业来说自动焊锡机可以进行USB数据线、电源线等线材的焊锡,行业里也叫做USB自动焊锡机,它节省了企业的人工成本,同时也保证了焊线成品的质量。那么USB自动焊锡机操作要注意哪些事项呢?接下来焊锡机厂家为你来解答这一问题。

  Automatic soldering machine is electronic enterprise is a common one of the devices, for the production line of the enterprise data automatic soldering machine can solder USB data cable, power line wires, the industry is also called the USB automatic soldering machine, it saves the labor costs of enterprises, but also to ensure the quality of welding wire products the. So what do you need to pay attention to USB automatic soldering machine operation? Next, the soldering machine manufacturer answers this problem for you.


  USB自动焊锡机操作要注意哪些事项


  1.焊点不能过于饱和,应该处于三四点的中间,不然锡点过大就容易和旁边的焊点相互断路,锡要与元件脚呈小半圆形,这样焊出线路板整齐,也是最良好的。

        1. spot not too saturated, should be in the middle of three or four points, or too large to tin point and next to each other to a tin solder breaker, half circular and element feet, so the welding circuit board neatly, is also the most good.


  2.USB自动焊锡机引线不能太细太长,焊接时的电压降不得大于初始电压的5%,而且操作时要戴手套,防护眼镜等。USB自动焊锡机在使用过程中不要将烙铁嘴放到海棉上清洁,只需将烙铁嘴上的锡搁入集锡硬纸盒内,这样保持烙铁嘴之温度不会急速下降。

  2.USB automatic soldering machine lead wire can not be too thin and too long, the voltage drop in welding should not be more than 5% of the initial voltage, and the operation should wear gloves, protective glasses and so on. USB automatic soldering machine used in the process should not be put on the sponge iron mouth clean, only need to be put into the mouth of the iron tin tin Set hard paper box, so keep the temperature not the rapid decline in iron mouth.


  3.USB自动焊锡机每天用完后,先清洁,再加足锡,然后马上切断电源,这样有助于机器的使用寿命增长。

  3.USB automatic soldering machine is used out every day, clean, add tin, and then cut off the power immediately, which helps to increase the service life of the machine.


  USB自动焊锡机的优点


  1、节省时间,降低作业员的劳动强度。

  1, save time, reduce the worker's labor intensity.


  2、USB自动焊锡机焊接速度快,减少材料的浪费。

  2, USB automatic soldering machine has fast welding speed and reduces the waste of material.


  3、USB自动焊锡机容易上手,减少焊接人员的培训时间。

  3, USB automatic soldering machine is easy to handle, reducing the training time of the welding personnel.


  以上就是关于USB自动焊锡机操作要注意哪些事项的解答,深圳市巨正东科技有限公司荣获国家高新技术企业称号的焊锡机厂家,专注于双Y双头焊锡机、单头双工位焊锡机、三轴四轴焊锡机、焊锡设备整体解决方案领导者,为你提供整体点胶解方案,欢迎来电咨询。

上一篇:自动焊锡机的背景详细介绍!2018-07-06

下一篇:自动焊锡机2018-07-10

相关阅读

此文关键字:USB自动焊锡机
我要评论:  
*内 容:
验证码: 点击刷新换一张
 

共有-条评论

正在加载...